On the side: detail of the standard lock put on jalousies. The lock is frontal, with an upper and a lower bolt through bars with terminals of 10 mm. The key is for the mechanism block driven by the handle. By request we can also supply external handle and key hole and high security European cylinder locks (see image on the page.

Left: detail of the anti-pull bolt on the hinges side (click on the image to enlarge) .

Above: the new steel defender for European cylinder. It is mounted to protect the external side of the cylinder.

 

Upper bolt

Above: detail of the hinge with anti –rust  thrust - ball bearing. Colour: wrinkling green (click on the image to enlarge)

Lock with safety- loop cylinder (click on the image to enlarge), suitable for passage French doors, when the key-hole and the handle will be external too.

Above: example of assembling of a jalousie with aluminium frame and intrados between the jalousie and the frame. The frame used is B2. Colour Raffaello brown (click on the image to enlarge).

Detail of the 30 x 15 lower tubular tyre with stop on the shutter: this solution joins great security (the bolt is protected), quickness in assembling (the jalousie is fastened in the lower part, so it is very quick to be assembled without setting), practicality (the bolt goes into the tubular tyre, so there is no need to bore the threshold). Please note another option: the extra bolt for the second jalousie.